Commissioned Work
If you have specific desires for us to build a custom piece, please contact us via phone and we will discuss our policy and the commission process. Once we finish our initial consultation with you over the phone, we will require examples of features you wish to have in your piece. With these we will proceed with design and development of your piece. Once our proposal is complete, and you give formal approval, a deposit of at least 50% is required. At this point we will begin construction. Upon completion of the piece and final payment, we will prepare for delivery.
Here are a few examples of commissioned work we have done in the past.
Figured Makore and Bloodwood Coffee Table
This lovely table has 16 piece in the center and 20 pieces in the outside ring
and is joined by 4 freeform legs with a rounded inside edge.The piece has a hand
rubbed antique oil finish and the glas is a sturdy piece 1/2" thick, beveled and polished
Cherry and Black Walnut Indoor Bench
Mortise and Tenon joinery with pegging, with Decorative Heads
Beautifully designed curves accent the backrest
Polyurethane finish for durability
Natural Edge Figured Wormy Maple Slab Coffee Table
This is a beautiful slab table, with angled legs and a floating shelf.
All joinery is through mortise and tenon
All inclusions were filled with black epoxy and abalone shells
Matching End Tables - Solid Figured Anegre
These 2 tables were a matching set to accompany the maple coffee table above
Both the top and bottom shelf are bookmatched out of solid 2" anegre stock.
The legs are solid straight 1.5" stock, all mortise and tenon joinery.
Front drawer was angle/scroll saw cut to close perfectly tight, with black analine dye
on the inside edge as a highlight. Handle was freeform cut on scroll saw from makore.
Finished with antique oil and then General Finishes HP waterbase.
Solid Purpleheart Sideboard with a beautiful decorative marble top inlay.
The picture just doesn't do this piece justice.
We are still trying to get the owner to take more pictures for us.
Click to Enlarge
Cherry Plywood Shelves faced with Cherry and finished with Antique oil.
Beautiful contemporary pieces.
Click to Enlarge
This Table with Four Stools was solid quartersawn makore with birdseye maple inlays on each stool and the main table. The legs and aprons have no recesses and are completely smooth as well as the top. Wenge accents the top. Mortise and Tenon joinery on 2" legs and aprons throughout the piece makes this exquisite table also virtually indestructible.
Click to Enlarge
This custom End Table is truly one-of-a-kind. The top is a very rare and exotic piece of waterfall bubinga accented with birdseye maple. The legs and aprons are constructed of birdseye maple and peruvian walnut, and constructed with mortise and tenon joinery. Hand rubbed antique oil was applied to bring out the color of the wood, then finished with polyurethane for superior protection.
Click to Enlarge
